Leica GPS1200 Series Technical Reference Manual page 816

COGO
Step Description
<Ortho Ht:> or <Local Ell Ht:> are input fields. The height of the
known point used in the COGO calculation is suggested. A height
value to be stored with the calculated point can be typed in.
The calculated coordinates are displayed.
Type in a point ID.
COORD (F2) views other coordinate types.
STAKE (F5) to access the Stakeout application program and stake
out the calculated COGO point.
After staking, measuring and storing the COGO point, COGO
Traverse Results, Result page is displayed.
SHIFT ELL H (F2) and SHIFT ORTH (F2). Available for local coordi-
nates. Changes between the ellipsoidal and the orthometric height.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
6. PAGE (F6) changes to the Code page.
7. COGO Traverse Results, Code page
<Code:>/<Point Code:> The thematical code. All codes of the job
can be selected.
Type in a code if required.
8. PAGE (F6) changes to the Plot page.
GPS1200 816
Refer to
chapter
43.4
19.1
11, 9.3.2