CONFIGURE
Coding & Linework,
Linework page
Config...\Survey Settings...
Field
Option
All Codes
<String
Choicelist
Attrib:>
Next step
PAGE (F1) changes to the Linework page. Refer to paragraph "CONFIGURE Coding &
Linework, Linework page".
The flags for Linework are defined on this screen. A flag
•
is stored as a property of a point.
•
can be exported with a format file.
•
is different to a code.
The flags defined on this screen are linked to the options available for <Linework:> in a
display mask of an application program. The selection for <Linework:> in a display mask
determines the flag stored with a point. The availability of <Linework:> in a display mask is
configured in CONFIGURE Define Display Mask n. Refer to "12 Linework" for information
on Linework.
Description
All codes of the job codelist will be available in the
choicelist for <Code:>/<Point Code:> in a display
mask of an application program. Selecting a line/area
code opens a new line/area.
Available for <Show Codes: All Codes>.
When this field is active, surveyed points that have
the same code attached are strung to one line.
GPS1200
381