Configuring To Connect To A Server - Leica GPS1200 Series Technical Reference Manual

34.2.2
Requirements
Configure connect to a
server step-by-step
NTRIP via Internet

Configuring to Connect to a Server

The configurations from the previous chapter must have been completed. Refer to "34.2.1
Configuring an Access to the Internet".
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Select Main Menu: Config...\Interfaces....
2. CONFIGURE Interfaces
Highlight Real-Time.
3. EDIT (F3) to access CONFIGURE Real-Time Mode.
4. CONFIGURE Real-Time Mode
<R-Time Mode: Rover>
<R-Time Data:> Select the type of data to be received from the
Internet.
<Port: NETx>
5. CONT (F1) to return to CONFIGURE Interfaces.
6. Highlight Real-Time.
7. CTRL (F4) to access CONFIGURE Set NET Port.
8. CONFIGURE Set NET Port
<User: Client>
GPS1200
Refer to
chapter
22.3.4
24.8
755