Leica GPS1200 Series Technical Reference Manual page 483

Config...\Interfaces... - General
Field Option
<Ref Choicelist
Antenna:>
Next step
IF additional rover
options
are not to be config-
ured
are to be configured
Description
The antenna used at the reference. If the real-time
data format does not contain the information of the
antenna certain corrections based on the information
of the antenna are applied in order to provide correct
results. The real-time data formats Leica, RTCM
v2.3, CMR and CMR+ contain this information.
If the reference data is corrected by absolute
antenna calibration values and a Leica
standard antenna is being used on the rover,
select ADVNULLANTENNA as reference
antenna.
THEN
CONT (F1) closes the screen and returns to the screen from where
CONFIGURE Real-Time Mode was accessed.
ROVER (F2). Refer to paragraph "CONFIGURE Additional Rover
Options, General page".
GPS1200 483