Leica GPS1200 Series Technical Reference Manual page 1294

Volume Calculations
VOLUMES
Volume Calculations
Menu
Next step
CONT (F1) accepts changes and accesses VOLUMES Volume Calculations Menu.
The VOLUMES Volume Calculations Menu lists all Volume Calculations steps and the
option to end Volume Calculations.
Description of the Volume calculations menu options
Volume Calculations
menu options
Survey Points
Triangulate Surface
GPS1200
CONT (F1)
To select the highlighted option and to continue
with the subsequent screen.
SHIFT CONF (F2)
To configure the Volume Calculations applica-
tion program. Accesses VOLUMES Configu-
ration. Refer to "48.3 Configuring Volume
Calculations".
Description
To measure points defining a new surface or
extending existing surfaces currently stored in the
active job.
To triangulate (delauny triangulation) the measured
surface points to establish the surface.
1294
Refer to
chapter
48.4.1
48.4.2