Leica GPS1200 Series Technical Reference Manual page 1163

Survey - General
Description of fields
Field Option
<Point ID:> Choicelist
<Antenna Ht:> User input
Next step
The reference station coordinates can be entered in three different ways.
IF the coordinates of the
reference station
are known
are those from the last used
reference station
Description
The point selected as reference station.
Opening the choicelist opens SURVEY Data: Job
Name which is similar to MANAGE Data: Job Name.
Refer to "9.2 Accessing Data Management".
The default antenna height as defined in the active
configuration set is suggested. Refer to "2 Antenna
Heights". Changing the antenna height here does not
update the default antenna height as defined in the
active configuration set. The changed antenna height
is used until the application program is exited.
THEN
Refer to paragraph "Set the reference station coordinates
step-by-step", "Using a known point stored in the active job".
Refer to paragraph "Set the reference station coordinates
step-by-step", "Using the coordinates from the last used refer-
ence station".
GPS1200 1163