Leica GPS1200 Series Technical Reference Manual page 380

Config...\Survey Settings...
Field Option
<Mand Always Prompt
Attribs:>
Only If No Value
Code Change
Only
<Thematc
Codes:>
With Codelist
Without Codelist
<Show Only Pt Codes
Codes:>
GPS1200
Description
The screen XX Enter Mandatory Attribute will
always appear when codes, having one or more
attributes of attribute type mandatory, are being
stored. Attributes of attribute type mandatory or fixed
can only be created in LGO.
The screen XX Enter Mandatory Attribute will only
appear when codes, having one or more attributes of
attribute type mandatory, are being stored without an
attribute value. Attributes of attribute type mandatory
must always be created in LGO.
The screen XX Enter Mandatory Attribute will only
appear when a new code with a mandatory attribute
was selected.
Sets the coding method.
Codes stored within the job codelist can be selected
to code points, lines and areas.
Codes stored within the job codelist cannot be
selected to code points, lines and areas. Each code
must be entered manually.
Only point codes will be available in the choicelist for
<Code:>/<Point Code:> in a display mask of an
application program.
380