Leica GPS1200 Series Technical Reference Manual page 1243

Survey - Hidden Points
Step Description
<Point ID:> The identifier for the hidden point. The configured point
ID template is used. The ID can be changed.
<Check Dist A:> The computed horizontal distance between <Point
A:> and the hidden point.
<Check Dist B:> The computed horizontal distance between <Point
B:> and the hidden point.
<Check Dist AB:> The computed horizontal distance between
<Point A:> and <Point B:>.
Check the computed distances.
10. Are the computed distances correct?
• If yes, continue with step 11.
• If no, continue with the row below step 15.
11. Type in a point ID.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
NEXT (F5) to store the hidden point and to return to HIDDEN PT
Hidden Point Measurement. Another hidden point can be meas-
ured.
12. PAGE (F6) changes to the Code page.
13. HIDDEN PT Hidden Point Result, Code page
GPS1200
Refer to
chapter
paragraph
"Computed
distances
on HIDDEN
PT Hidden
Point
Result,
Result
page"
19.1
11
1243