Creating A New Id Template - Leica GPS1200 Series Technical Reference Manual

Config...\Survey Settings...
19.1.3
Create ID template step-
by-step

Creating a New ID Template

Step Description
1. Refer to "19.1.2 Accessing ID Template Configuration" to access CONFIGURE ID
Templates.
2. In CONFIGURE ID Templates highlight any field.
3. ENTER to access CONFIGURE ID Template Library.
4. Highlight an ID template. A copy of this ID template is taken for further configura-
tions.
5. NEW (F2) to access CONFIGURE New ID Template.
6. CONFIGURE New ID Template
<ID:> The name of the ID template and the format of the ID object. Any characters
including spaces are allowed. Leading spaces are not accepted.
<Increment:> ID's are incremented numerical or alphanumerical.
<Increment By:> The amount by which the point ID is incremented.
<Cursor Posn:> The character position at which the cursor is placed when
ENTER is pressed in <Point ID:> when surveying points. <Cursor Posn: Last
Character> means that the cursor is placed immediately to the right of the last
character.
Adapt the settings according to the requirements.
7. CONT (F1) stores the new ID template into the ID template library and returns to
CONFIGURE ID Template Library.
8. CONT (F1) returns to CONFIGURE ID Templates.
GPS1200 362