Leica GPS1200 Series Technical Reference Manual page 1236

Survey - Hidden Points
Step Description
7. HIDDEN PT Hidden Point Result, Result page
<Point ID:> The identifier for the hidden point. The configured point
ID template is used. The ID can be changed.
<Check Chng A:> The computed distance on the line from <Point
A:> to <Point B:> from <Point A:> to the point of intersection with
<Check Offset:>.
<Check Chng B:> The computed distance on the line from <Point
B:> to <Point A:> from <Point B:> to the point of intersection with
<Check Offset:>.
<Check Offset:> The computed perpendicular distance from the
hidden point to the line from <Point> A> to <Point B:>.
<Check Dist AB:> The computed horizontal distance between
<Point A:> and <Point B:>.
Check the computed distances.
8. Are the computed distances correct?
• If yes, continue with step 9.
• If no, continue with the row below step 13.
9. Type in a point ID.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
GPS1200 1236
Refer to
chapter
paragraph
"Computed
distances
on HIDDEN
PT Hidden
Point
Result,
Result
page"
19.1