DET C SYS
Step 2: Choose Parame-
ters
Determine Coordinate System - Normal
If a coordinate system was chosen to be edited in DET C SYS Determine Coord System
Begin, pressing CONT (F1) accesses DET C SYS Step 3: Match Points (n). Pressing ESC
does not re-access DET C SYS Determine Coord System Begin but accesses DET C SYS
Step 2: Choose Parameters and DET C SYS Step 1: Choose Transform Type.
This screen contains different fields, depending on what transformation type was chosen in
DET C SYS Step 1: Choose Transform Type.
For <Transfrm Type: Onestep>
Description of fields
Field
Option
<Geoid
Choicelist
Model:>
CONT (F1)
To confirm the selections and to continue with
the subsequent screen.
Description
The geoid model to be used in the transformation.
Geoid models from MANAGE Geoid Models can be
selected.
GPS1200
949