Survey Cross Section
GPS1200
STOP (F1)
To end measuring the point. When <Auto
STOP: Yes> in CONFIGURE Point Occupa-
tion Settings, recording of positions ends
automatically as defined by the stop criteria.
The position mode icon changes to the moving
icon. (F1) changes to STORE.
STORE (F1)
To store the measured point. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
START (F4) and END (F4)
To open and close the selected cross section
template. While the template is open, the
elements of the cross section can be surveyed.
SURVY (F5)
To manually occupy a point that is not part of
the cross section. The point is not treated as an
element of the cross section. The open
template remains open.
Available if a template has been opened with
START (F4).
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure the Cross Section Survey applica-
tion program. Refer to "47.3 Configuring
Survey Cross Section".
1270