Leica GPS1200 Series Technical Reference Manual page 824

COGO
Step Description
<Point ID:> The identifier for the COGO point depending on the point
ID template configured for <Survey Pts:> in CONFIGURE ID
Templates. The point ID can be changed.
<Ortho Ht:> or <Local Ell Ht:> are input fields. The height of the first
point used in the COGO calculation is suggested. A height value to
be stored with the calculated point can be typed in.
The calculated coordinates are displayed.
Type in a point ID.
COORD (F2) views other coordinate types.
STAKE (F5) to access the Stakeout application program and stake
out the calculated COGO point.
After staking, measuring and storing the COGO point COGO Brng -
Brng Results, Result page is displayed.
SHIFT ELL H (F2) and SHIFT ORTH (F2). Available for local coordi-
nates. Changes between the ellipsoidal and the orthometric height.
SHIFT INDIV (F5) for an individual point ID independent of the ID
template. SHIFT RUN (F5) changes back to the next ID from the
configured ID template.
7. PAGE (F6) changes to the Code page.
8. COGO Brng - Brng Results, Code page
<Code:>/<Point Code:> The thematical code. All codes of the job
can be selected.
GPS1200 824
Refer to
chapter
19.1
43.4
19.1
11, 9.3.2