Reference Line
Step
Description
•
For <Task: XX Arc>
<Method:> The method by which the reference arc will be
defined. <Method: 3 Points> defines the reference arc using
three known points. <Method: 2 Points/Radius> defines the
reference arc with two known points and a known radius.
<Arc Dist:> The horizontal grid distance along the arc between
<Start Point:> and <End Point:> of the arc. ----- is displayed if the
distance cannot be calculated.
Choose the method by which to define a reference line/arc and enter
the appropriate parameters.
SURVY (F5) available for <Start Point:>, <Second Point> and
<End Point:>. To manually occupy a point.
For all point fields, the MapView interactive display on the Map page
can be used to select the desired point.
7.
PAGE (F6) to access REFLINE New Reference XX, Map page.
8.
REFLINE New Reference XX, Map page
MapView displays the reference line/arc as a solid line.
9.
STORE (F1) to store changes and return to REFLINE Manage
Reference XX.
GPS1200
1036
Refer to
chapter
32
32.5