Leica GPS1200 Series Technical Reference Manual page 729

MapView Interactive Display Feature
Step Description
When there are multiple points within the same area and
the precise selection is unclear, tapping on the point will
access XX Select Point.
3. Have multiple points been selected?
• If yes, continue with step 4.
• If no, continue with step 6.
4. XX Select Point
Point ID The ID of the points within range of the point
selection.
Point Code The code of the points within range of the point
selection.
Select the desired point.
MORE (F5) to display information about the point code, the
3D coordinate quality and class, the time the point was
stored and the date the point was stored.
5. CONT (F1) returns to MANAGE Data: Job Name, Map
page with the focus on the selected point.
6. A square is centred on the selected point and the point
parameter text, as defined in XX MapView Configuration,
Points page, is highlighted.
GPS1200
Display
729