Leica GPS1200 Series Technical Reference Manual page 1111

Stakeout modes
Coordinate system
Point types
Height types
Height source
Stakeout
Points can be staked using different modes:
• Polar mode.
Staking out is possible for <R-Time Mode: Rover> and <R-Time Mode: None>.
The points to be staked must exist in a job on the active memory device.
Points cannot be staked if the active coordinate system is different to that in which the points
to be staked are stored. For example, the points to be staked are stored with local coordi-
nates and the active coordinate system is WGS 1984.
It is possible to stake:
• Position only points.
Height type of the point to be staked:
Height type computed for current position:
Heights can be taken into account from
• the vertical component of a coordinate triplet.
DTM Stakeout must be activated via a licence key. Refer to "30 Tools...\Licence Keys" for
information on how to type in the licence key.
• Orthogonal mode.
• Height only points.
Orthometric OR ellipsoidal
Orthometric OR ellipsoidal depending on the
• configured transformation,
• availability of a geoid model,
• height type of the point to be staked.
If possible, the height type of the point to be
staked is computed for the current position.
GPS1200
• Points with full sets of coordinates.
• a Digital Terrain Model.
1111