Leica GPS1200 Series Technical Reference Manual page 971

Determine Coordinate System - One Point Localisa-
tion
Description of fields
Field Option
<Transfrm User input
Name:>
<Transfrm Onestep, Twostep
Type:> or Classic 3D
<Height Orthometric or
Mode:> Ellipsoidal
Next step
IF THEN
<Transfrm Type: CONT (F1) to access DET C SYS Step 2: Choose Parameters.
Onestep> Refer to "40.2 Determine Coordinate System - Onestep Transforma-
tion".
<Transfrm Type: CONT (F1) to access DET C SYS Step 2: Choose Parameters.
Twostep> Refer to "40.3 Determine Coordinate System - Twostep Transforma-
tion".
<Transfrm Type: CONT (F1) to access DET C SYS Step 2: Choose Parameters.
Classic 3D> Refer to "40.4 Determine Coordinate System - Classic 3D Transfor-
mation".
<Azimuth:> is used throughout this chapter. This should always be considered to also mean
<Bearing:>.
Description
A unique name for the coordinate system. The name
may be up to 16 characters in length and may include
spaces.
The type of transformation to be used when deter-
mining a coordinate system.
The height mode to be used in the determination of a
coordinate system
GPS1200 971