Leica GPS1200 Series Technical Reference Manual page 958

Determine Coordinate System - Normal
For <Transfrm Type: Twostep>
Description of fields
Field Option
<Residuals:> None,
1/Distance
Multiquadratic
<Pre Trans- Output
form:>
<Ellipsoid:> Output
<Projection:> Output
<Geoid Output
Model:>
GPS1200
Description
The method by which the residuals of the control
XX
or points will be distributed throughout the transforma-
tion area. Refer to "38.3.1 Configuring Determine
Coordinate System - Normal" paragraph "DET C SYS
Configuration, Residuals page".
Name of the pre-transformation used, as defined in
DET C SYS Step 1: Choose Transform Type.
Name of ellipsoid used, as defined in DET C SYS
Step 2: Choose Parameters.
Name of projection used, as defined in DET C SYS
Step 2: Choose Parameters.
Name of geoid model used, as defined in DET C SYS
Step 2: Choose Parameters.
958