Leica GPS1200 Series Technical Reference Manual page 1194

Survey - Auto Points
Field Option
Stop & Go
User Decides
<Log Every:>
User input
For <Log By:
Time> from 0.05s
to 60.0s
<Min User input
Distance:>
GPS1200
Description
An auto point is stored when the position of the
antenna does not move more than the distance
configured in <Stop Position:> within the <Stop
Time:>.
Once a point has been stored, the position from the
point just stored must change more than the distance
configured in <Stop Position:> before the routine
starts again.
An auto point is stored upon pressing OCUPY (F3) in
SURVEY Survey: Job Name, Auto page. In the
beginning, the chain to which the auto points should
be assigned must be started with START (F1). In the
end, the chain must be closed with STOP (F1).
Available unless <Log By: Dist or Ht>.
For <Log By: Distance> and <Log By: Height Diff>.
The difference in distance or height before the next
auto point is logged.
For <Log By: Time>. The time interval before the
next auto point is logged.
Available for <Log By: Dist or Ht>. The value for the
difference in distance before the next auto point is
logged.
1194