Leica GPS1200 Series Technical Reference Manual page 823

COGO
Step Description
For <Write Logfile: Yes> in COGO Configuration, Logfile
page the result of the COGO inverse calculation is written to
the logfile.
The values for the azimuth and the offset can be selected from
previous COGO inverse calculations.
LAST (F4) when <Azimuth:> or <Offset:> is highlighted. To recall
previous results from COGO inverse calculations.
Upon pressing CONT (F1) in COGO Last Inverse Calculations, the
selected result is copied to the field which was highlighted when
LAST (F4) was pressed.
The values for the azimuth and the offset can be mathematically
modified.
SHIFT MODIF (F4) when <Azimuth:> or <Offset:> is highlighted. To
add, subtract, multiply and divide values.
4. COGO Intersection Input, Input page
The procedure to input the second known point and the azimuth is
identical to the procedure for the first known point. Repeat steps 2.
and 3.
5. CALC (F1) to calculate the result.
6. COGO Brng - Brng Results, Result page
GPS1200
Refer to
chapter
37.12
37.13
823