Leica GPS1200 Series Technical Reference Manual page 791

COGO
Step Description
The horizontal distance values which are displayed depend on the
configuration for <Distance Type:> in COGO Configuration,
Parameters page.
----- is displayed for unavailable information, for example if a position
only point is used, <Δ Height:> cannot be calculated.
<Azimuth:> The direction from the first to the second known point.
<HDist-XX:> The horizontal distance between the two known points.
<Δ Height:> The height difference between the two known points.
<Slope Dist:> The slope distance between the two known points.
<Grade:> The grade between the two known points.
<Δ Easting:> The difference in Easting between the two known
points.
<Δ Northing:> The difference in Northing between the two known
points.
4. PAGE (F6) changes to the Map page.
5. COGO Inverse Input, Map page
The calculated distance between the two known points is indicated.
SHIFT QUIT (F6) does not store the calculated results and exits
COGO calculation.
6. STORE (F1) to store the result.
For <Write Logfile: Yes> in COGO Configuration, Logfile page the
result is written to the logfile.
GPS1200
Refer to
chapter
32.5
791