Leica GPS1200 Series Technical Reference Manual page 1273

Survey Cross Section
Field Option
<Code:> Output
<Stringline Output
ID:>
<Dist to Last:> Output
Next step
IF
a cross section template is to be
opened
an element of a cross section is
to be surveyed
a cross section template is to be
closed
Description
The name of the code.
Point codes will be stored with the measured point.
Free codes will be stored, depending on the configu-
ration, before or after the measured point.
Available for <String Attrib:> being activated in
CONFIGURE Coding & Linework, Coding page.
Points that have the same code attached and belong
to different cross sections are strung to one line.
The horizontal grid distance from the current position
to the last surveyed point. ----- is displayed for
unavailable information.
THEN
select the desired <Template:>. START (F4).
OCUPY (F1), STOP (F1) and then STORE (F1).
Once the end of a cross section is surveyed then
the next cross section will be measured.
Depending on the selection this is either in the
same direction or in ZigZag mode.
select the desired <Template:>. END (F4).
GPS1200 1273