Leica GPS1200 Series Technical Reference Manual page 1299

Volume Calculations
STORE (F1)
To store the measured surface point. When
<Auto STORE: Yes> in CONFIGURE Point
Occupation Settings, the measured surface
point is stored automatically. (F1) changes to
OCUPY.
NEAR (F2)
To search <
nearest to the current position when the key is
pressed. The point is selected as the point to
be measured and is displayed in the first field
on the screen. After measuring and storing the
nearest point, the next point suggested is the
one which was suggested before the key was
pressed.
Available when OCUPY (F1) is displayed.
>BNDY (F3) / >SURF (F3)
To change the class of the point to be meas-
ured between surface point and boundary
point.
H PNT (F5)
To calculate hidden points which may be
needed during triangulating the surface. To
return to Volume calculations application
program, press SHIFT QUIT (F6) or ESC.
Available for OCUPY (F1) being displayed.
PAGE (F6)
To change to another page on this screen.
GPS1200
Volumes
Job:> for the point
1299