Access
Config...\General Settings...
Type
PIN protection active
PIN code generation
Attempts for correct PIN code
PUK code generation
Select Main Menu: Config...\General Settings...\Start Up & Power Down.
OR
Within the configuration set wizard. Refer to "14.2 Accessing Configuration Set Manage-
ment".
Description
Receiver prompts for PIN code entry
•
after starting up.
•
when changing the PIN code in CONFIGURE Start
Up & Power Down.
The PIN code is not checked if a wake-up session starts.
By the user.
Five. After five false attempts, a Personal UnblocKing
code must be typed in.
•
By Leica Geosystems.
•
For receivers delivered with firmware version 2.10 or
higher, the PUK code comes with the receiver.
•
For receivers delivered with firmware versions lower
than v2.10, contact a Leica representative to obtain a
PUK code.
GPS1200
453