Stake to arc - vertical
measurements
REFLINE
Enter Offset Values
Reference Line
P3
P0
GPS12_122
This screen is for typing in the stakeout values for a point relative to the reference line/arc.
The screen contains different fields depending on the options chosen for <Heights:> and
<Edit Height:> in REFLINE Configuration, Heights page and <Task:> in REFLINE
Choose Task & Reference Line, Reference page. The explanations for the softkeys given
below are valid in all cases.
P1
P2
d2
P0 Start point
d1
P1 End point
P2 Target point
P3 Reference point
d1
GPS1200
<Height Offset:>, for <Heights: Use Start
Point>
1061