Leica GPS1200 Series Technical Reference Manual page 1062

Reference Line
Description of fields
Field Option
<Point ID:> User input
<Stake User input
Offset:>
GPS1200
CONT (F1)
To confirm the selections and to continue with
the subsequent screen.
LINE (F4)
To define/select a reference line/arc.
Accesses REFLINE Choose Task & Refer-
ence Line. Refer to "41.4 Managing Refer-
ence Lines/Arcs".
SURVY (F5)
To measure a point relative to the reference
line/arc.
SHIFT CONF (F2)
To configure the reference line/arc. Refer to
"41.3 Configuring Reference Line".
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template
and the running point ID according to the ID
template. Refer to "19.1 ID Templates".
Description
The point ID of the target point to be staked.
The offset from the reference point to the target point.
1062