Leica GPS1200 Series Technical Reference Manual page 1264

Survey Cross Section
Description of fields
Field Option
<Job:> Choicelist
<Coord Output
System:>
<Codelist:> Choicelist
Output
<Config Set:> Choicelist
<Antenna:> Choicelist
GPS1200
Description
The active job. All jobs from Main Menu:
Manage...\Jobs can be selected. The templates
used for a cross section survey are stored in this job.
The coordinate system currently attached to the
selected <Job:>.
No codes are stored in the selected <Job:>. All
codelists from Main Menu: Manage...\Codelists can
be selected.
Codes have already been stored in the selected
<Job:>. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in manually, then the
name of the active job is displayed.
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected. Configuration sets with <R-Time
Mode: Reference> cannot be used in the Survey
Cross Section application program.
The antenna currently defined to be used in the
selected configuration set. All antennas from Main
Menu: Manage...\Antennas can be selected.
1264