Reference Line
Field
Option
<Config Set:>
Choicelist
<Antenna:>
Choicelist
Next step
IF the Reference
Line application
program
is to be accessed
is to be configured
Description
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected. Configuration sets with <R-Time
Mode: Reference> cannot be used in the Reference
Line application program.
The antenna currently defined to be used in the
selected configuration set. All antennas from Main
Menu: Manage...\Antennas can be selected.
THEN
CONT (F1) accepts the changes and accesses the Reference Line
application program. Refer to "41.4 Managing Reference
Lines/Arcs".
CONF (F2). Refer to "41.3 Configuring Reference Line".
GPS1200
1015