Leica GPS1200 Series Technical Reference Manual page 522

Config...\Interfaces... - General
Description of fields
Field Option
<Use Device:> Yes or No
<Port:> Bluetooth x
NETx
Port x
Port 1
<Device:> Output
<Job From 1 to 8
Number:>
<Job Name:> Output or User
input
GPS1200
Description
Activates the interface.
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
Available for an activated Internet interface. If these
ports are not assigned to a specific interface, then
these ports are additional remote ports.
The physical port P1, P2 or P3 on the instrument to
which the device is attached.
Available for RX1250. LEMO port on RX1250.
The device currently assigned to the selected port
within the active configuration set. The device which
is selected determines the availability of the next
fields.
The number of the job on the TPS400/700 to which
the data will be sent.
Displays the name of an existing job assigned to the
selected job number. If the selected job number does
not yet have a job name assigned to it, enter a new
job name. This job is then created on the TPS400/
700 instrument.
522