Leica GPS1200 Series Technical Reference Manual page 1225

Survey - Hidden Points
Step Description
SUN (F3) when <Azimuth:> is highlighted. The azimuth from the
direction of the sun to <Point:> is computed.
AZMTH (F4) when <Azimuth:> is highlighted. To select or manually
occupy an auxiliary point and to compute the azimuth.
EAO (F2) available for <EAO Method: New for Each Point> or
<EAO Method: Permanent> in CONFIGURE Hidden Point Device
Offsets. To change or enter an External Angle Offset.
4. HIDDEN PT Hidden Point Measurement
<Horiz Dist:> The horizontal distance from <Point:> to the hidden
point.
Type in a distance. When a hidden point measurement device is
attached to the receiver to measure the distance, the value is auto-
matically transferred.
DIST (F2) available for Leica Disto
when a distance field is highlighted. To measure the distance without
pressing DIST on the Disto.
SLOPE (F5) when <Horiz Dist:> is highlighted. To measure a slope
distance and an elevation angle or percentage grade. The values are
used to compute the horizontal distance.
5. CALC (F1) calculates the hidden point and displays the results in
HIDDEN PT Hidden Point Result, Result page.
6. HIDDEN PT Hidden Point Result, Result page
TM
pro
GPS1200
4 TM
and Leica Disto pro
Refer to
chapter
46.4.1
46.4.2
23.1.7
4
a
46.5
1225