Volume Calculations
Volume Calculations
menu options
Compute Volume
End Volume Calcula-
tions
Next step
IF
a Volume Calculations
method is to be started
Volume Calculations is to
be configured
Volume Calculations is to
be ended
Description
To compute the volume of a surface by a reference
(3D point, entered elevation) or by the stockpile
method.
To end Volume Calculations and return to the
screen from where Volume Calculations was
accessed.
THEN
highlight the relevant option and press CONT (F1). Refer to the
chapters stated above.
SHIFT CONF (F2). Refer to "48.3 Configuring Volume Calcu-
lations".
highlight End Volume Calculations and CONT (F1).
GPS1200
Refer to
chapter
48.4.3
1295