Leica GPS1200 Series Technical Reference Manual page 1179

Survey - General
Step Description
1. Refer to paragraph "Access step-by-step" to access SURVEY
Survey: Job Name.
2. PAGE (F6) until the page displaying <Start Time:> is active.
<Start Time:> The current local time with the seconds rounded to 00,
for example for the current local time 07:37:12 it is <Start Time:
07:38:00>.
3. Highlight <Start Time:>.
4. Type in the start time in hours, minutes and seconds when the point
occupation should begin.
5. OCUPY (F1)
The point occupation does not start yet. This is indicated by the posi-
tion mode icon.
<Start Time:> changes to <Time to Go:>.
<Time to Go:> The countdown time in hours, minutes and seconds
before the point occupation starts automatically.
The point occupation starts when <Time to Go: 00:00:00>.
Data is logged as configured in the configuration set.
This is indicated by the position mode icon.
Any occupation counter defined to be used in display mask is
displayed and starts incrementing.
<Time to Go:> changes to <Time at Point:>.
GPS1200
Refer to
chapter
1179