Leica GPS1200 Series Technical Reference Manual page 1034

Reference Line
Create reference
line/arc step-by-step
Description of columns
Column Description
Name Names of all the reference lines/arcs available in the <Control Job:>.
Date Date that the reference line/arc was created.
Next step
IF a reference THEN
line/arc
is to be selected highlight the desired reference line/arc.
CONT (F1) closes the screen and returns to REFLINE Choose
Task & Reference Line.
is to be created NEW (F2). Refer to paragraph "Create reference line/arc step-by-
step".
is to be edited highlight the reference line/arc and EDIT (F3). Refer to paragraph
"Edit reference line/arc step-by-step".
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "41.2 Accessing Reference Line" to access REFLINE Refer-
ence Line/Arc Begin.
GPS1200 1034
Refer to
chapter