ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
32
Confidential and Proprietary Information of ZTE CORPORATION
area show
This command is used to show all areas in FW system.
area show
To show all areas, execute the following command:
# area show
area clean
This command is used to clear unquoted areas in FW system.
area clean
To clear all areas not quoted by policy, execute the following com-
mand:
# area clean
group_address
For convenience of user customization, FW system supports to
combine host, subnet, scope addresses to one group address as
source address or destination address of rule. Member of group
address must be one predefined address: host address, subnet
address or scope address.
group_address add
This command is used to add one address group.
group_address add name <string1>[member <string2>]
Parameter
add
name
<string1>
member
<string2>
Description
This adds one address group.
This sets name for address group.
This is one string, indicating the name of
address group.
This sets member in address group.
This is one string, indicating address object,
which can be defined host object, subnet
object or address range object.