Policy Delete - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
Example
Parameter
<string12>
av
on|off
permanent
on|off
log
on|off
enable
yes|no

policy delete

This command is used to delete one access control rule. execute
the following command.
policy delete id <number>
Parameter
<number>
To delete one access control rule. execute the following command.
# policy delete id 8503
Confidential and Proprietary Information of ZTE CORPORATION
Description
This specifies object name, which must be
defined in content filtering module and only
one name can be selected.
This sets whether to enable anti-virus module.
Enable/disable, disable by default.
This is the switch of long connection.
on/off
It sets whether to record the event in log
or prompt alarm message when a packet
matches rule. It doesn't record event into log
by default.
This records the event into log/doesn't record
the event into log/generates alarm.
This specifies whether to enable this rule.
Enable/Disable
Description
This is one string, which must be ID of
predefined rule.
Chapter 6 policy (firewall)
73