ZXR10 8900 Series Command Manual (FW Volume)
Command
Illustration
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
128
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
area
<string1><
addressid
<number1>
addressname
<string2><
vsid
<number2>
Service rule can be modified except for id.
To modify the service whose id is 8361, for which enable GUI ser-
vice on interface gei_5/6, execute the following command:
# service modify id 8361 name gui area area_gei_5/6
addressname any
service delete
This command is used to delete one open service rule.
service delete id <number>
Parameter
<number>
To view the id needed for deleting one service, execute command
service show.
To delete the service whose id is 8361, execute the following com-
mand:
# service delete id 8361
service show
This command is used to show one open service rule.
service show [name < gui|snmp|ssh|monitor|ping|telnet|to
sids|auth|ntp|update|dhcp |rip | l2tp|pptp|webui|ipsecvpn
|sslvpn >]
Description
It selects the area from which service request
is sent. The area must be selected from
existing ones.
This is one string.
It sets ID for permitted address object.
This is one number.
It sets name for permitted address object.
It is a string. It must be a preset host, subnet
or scope address object.
This is id of virtual system.
This is one number.
Description
This selects id of service opened by GW.