Rule Show; Rule Move; Service; Service Add - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Command
Function
Command Format
Parameter
Description
Command
Function

rule show

This command is used to show all packet filtering rules.
rule show

rule move

This command is used to move one specific rule after or before
another rule.
rule move id <number1> before <number2>|after <number3
>[vsid <number4>]
Parameter
move
id
<number1>
before
<number2>
after
<number3>
vsid
<number4>

service

Management to service access control rule (setting rules of ac-
cessing host): To conduct better configuration management to FW,
user is provided with a classification management method, which
classifies users logging into FW according to IP addresses. In this
way, network administrator can specify the mode of logging into
FW by users in an IP address segment or management level.

service add

This command is used to add one open service rule.
Confidential and Proprietary Information of ZTE CORPORATION
Description
This moves packet filtering rule.
This is the id of packet filtering rule to be
moved.
This is one number.
This command is used to move one specific
rule before another rule.
This is one number.
This command is used to move one specific
rule after another rule.
This is one number.
This is id of virtual system.
This is one number.
Chapter 11 pf
125