Probe-Time; Probe-Time Set; Probe-Time Show; Reboot - Zte ZXR10 8900 Series Command Manual

Command Format
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Example
Command
Function
Command Format
probe-server-time show
# probe-server-time show server update time is 20

probe-time

This set of commands is used to set the interval of probing statuses
of all servers in virtual server.

probe-time set

This command is used to set the interval of probing statuses of all
servers in virtual server.
probe-time set <number>
Parameter
<number>
To set the interval of probing statuses of all servers in virtual server
to 20 seconds, execute the following command:
# probe-time set 20 time set is 20 second

probe-time show

This command is used to show the interval of probing statuses of
all servers in virtual server.
probe-time show
To show the interval of probing statuses of all servers in virtual
server, execute the following command:
# probe-time show time set is 20 second

reboot

This command is used to reboot FW engine.

reboot

Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one number, in seconds, in range of
5-30, 10 by default.
Chapter 13 system
153