Dbfilt Delete - Zte ZXR10 8900 Series Command Manual

10g routing switch
Hide thumbs Also See for ZXR10 8900 Series:
Table of Contents

Advertisement

Parameter
<ipaddress4>
ipproto
tcp|udp|icmp
sport1
<port1>
sport2
<port2>
dport1
<port3>
dport2
<port4>
type1
<port5>
type2
<port6>
To modify packet capture rule whose id is 8224 so that the max
Example
length of packet can be 300K, execute the following command:
# dbfilt modify id 8224 maxlen 300 dev eth0 smac
00:08:2E:1A:06:80 dmac 00:08:2D:1A:19:80 l2proto ip sip1
192.168.83.2 sip2 192.168.83.200 dip1 192.168.1.163 dip1
192.168.1.225 ipproto tcp sport1 4000 sport2 5000 dport1
8000 dport2 9000

dbfilt delete

This command is used to delete one packet capture rule.
Command
Function
Description
This is one string, indicating IP address, in
format of A.B.C.D.
This modifies protocol type. Three options are
available: tcp, udp and icmp.
Here tcp indicates TCP protocol, udp indicates
UDP protocol and icmp indicates ICMP
protocol. When selecting tcp or udp, user also
needs to set source port and destination port
of packet; when selecting ICMP, user needs
to set ICMP type code.
This modifies the start port of packet source
port (this parameter needs being set when
selecting tcp or udp as protocol type).
This is one number, indicating port id.
This modifies the end port of packet source
port (this parameter needs being set when
selecting tcp or udp as protocol type).
This is one number, indicating port id.
This modifies the start port of packet
destination port (this parameter needs being
set when selecting tcp or udp as protocol
type).
This is one number, indicating port id.
This modifies the end port of packet
destination port (this parameter needs being
set when selecting tcp or udp as protocol
type).
This is one number, indicating port id.
This modifies the start port of ICMP port (this
parameter needs being set when selecting
ICMP as protocol type).
This is one number, indicating ICMP port id.
This modifies the end port of ICMP port (this
parameter needs being set when selecting
ICMP as protocol type).
This is one number, indicating ICMP port id.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 debug
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents