ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Parameter
Description
Command
Illustration
Example
Command
Function
Command Format
34
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
newname
<string2>
To rename groupaddr1 to groupaddr2, execute the following com-
mand:
# group_address rename oldname groupaddr1 newname
groupaddr2
group_address delete
This command is used to delete one address group.
group_address delete [id <number1>][name <string>]
Parameter
delete
id
<number1>
name
<string>
To delete address group, it is available to delete the address group
according to address group name, address group id or both. How-
ever, in case address group id and address group name are incon-
sistent, address group name shall apply.
When no parameter is given, all address groups not quoted by
policy is deleted.
To delete groupaddr1, execute the following command:
# group_addrees delete name groupaddr1
group_address delmember
This command is used to delete one member in address group.
group_address delmember groupname <string1> member
<string2>
Description
This specifies new name for address group.
This is one string, indicating the new name
of address group.
Description
This deletes one address group.
This specifies ID of the address group to be
deleted.
This is one number, indicating ID of address
group.
This specifies the name of address group to
be deleted.
This is one string, indicating the name of
address group.