Webui Ssl-Verify-Client - Zte ZXR10 8900 Series Command Manual

Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Example
webui max-client <number>
Parameter
<number>
To set the max number of users that log into WEBUI system at the
same time to 100, execute the following command:
# webui max-client 100

webui ssl-verify-client

This command is used to set WEBUI authentication mode.
webui ssl-verify-client <yes|no>
Parameter
yes
no
To set WEBUI authentication mode to client authentication, exe-
cute the following command:
# webui ssl-verify-client yes
Confidential and Proprietary Information of ZTE CORPORATION
Description
This is one number, indicating the max user
number, in range of 5-200.
Description
This enables client authentication. In this
authentication mode, user needs to use
correct certificate, username and password to
log into WEBUI system successfully.
This disables client authentication. In this
authentication mode, user only needs to
provide correct username and password to log
into WEBUI system of FW system successfully.
Chapter 13 system
161