Dbfilt; Dbfilt Add - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Parameter
Description
24 Confidential and Proprietary Information of ZTE CORPORATION

dbfilt

This set of commands are used to manage packet capture rules of
FW. User can use these commands to add, modify or delete packet
capture rules.

dbfilt add

This command is used to add one packet capture rule.
dbfilt add maxlen <number1> dev <string1> smac <macaddr
ess1> dmac <macaddress2> l2proto <arp|ip|number2>[sip1
<ipaddress1> sip2 <ipaddress2> dip1 <ipaddress3> dip2 <ipa
ddress4> ipproto <tcp|udp|icmp|number3> sport1 <port1>
sport2 <port2> dport1 <port3> dport2 <port4>[type1 <por
t5> type2 <port6>]]
Parameter
add
maxlen
<number1>
dev
<string1>
smac
<macaddress1>
dmac
<macaddress2>
l2proto
arp|ip|number2
sip1
<ipaddress1>
sip2
<ipaddress2>
dip1
<ipaddress3>
Description
This adds one packet capture rule.
This sets packet length.
This is one number, which is packet length.
This specifies interface name.
This is one string, indicating interface name.
This sets source MAC address of packet.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This sets destination MAC address of packet.
This is one string, indicating MAC address, in
format of 00:00:00:00:00:00.
This specifies the type of protocol to be L2
protocol.
When setting IP type for user, it also needs
to set source/destination IP and other data
of packet.
This sets the start address of packet source
IP.
This is one string, indicating IP address, in
format of A.B.C.D.
This sets the end address of packet souce IP.
This is one string, indicating IP address, in
format of A.B.C.D.
This sets the start address of packet
destination IP.
This is one string, indicating IP address, in
format of A.B.C.D.