ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
158
Confidential and Proprietary Information of ZTE CORPORATION
terminal show
This command is used to show terminal idle-timeout.
terminal show
# terminal show terminal idle timeout: 60 seconds
time show
This command is used to show device time.
time show
# time show +08 2007-01-19 09:58:16
traceroute
This command is used to show the information of routing packet
to destination.
traceroute <string>
Parameter
<string>
# traceroute 192.168.83.231 traceroute to
192.168.83.231 (192.168.83.231), 30 hops max, 40 byte
packets
update filename
This command is used to set system update parameter.
update filename < string1> serip <ipaddress> sysdisk
<
normal
>[ftp
<string3>]]
Parameter
update
Description
This is the ip address of destination, in format
of 0.0.0.0.
<yes>[ftp-user
<sting2>][ftp-password
Description
This updates FW system.