Command
Function
Command Format
Parameter
Description
Command
Function
Command Format
Parameter
Description
Command
Function
Command Format
Parameter
tcp|6|udp|17
icmp|1
sport
<port1>
dport
<port2>
type
<number2>
dbfake start
This command is used to enable one virtual TCP/UDP packet rule
and create one virtual packet.
dbfake start id <number>
Parameter
<number>
dbfake delete
This command is used to delete one virtual TCP/UDP packet rule.
dbfake delete id <number>
Parameter
<number>
dbfake show
This command is used to view all virtual packet rules.
dbfake show
Confidential and Proprietary Information of ZTE CORPORATION
Description
This specifies the protocol type of packet.
Both tcp and 6 indicate TCP protocol and both
udp AND 17 indicate UDP protocol.
This specifies the protocol type of packet.
Both icmp and 1 indicate ICMP protocol.
This specifies source port of TCP or UDP
packet.
This is one digital string, in range of 0-65535.
This specifies destination port of TCP or UDP
packet.
This is one digital string, in range of 0-65535.
This sets type of ICMP packet.
This is one digital number, which shows type
of ICMP packet.
Description
This is one number, indicating packet ID.
Description
This is one number, indicating packet ID.
Chapter 3 debug
23