Alarmevent Show (An Alarm Event); Alarmevent Show (All Alarm Events) - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Example
82 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
notice
<empty>
To set one alarm rule, which specifies that beep1 alarming mode
is used when hardware changes (beep1 is defined voice alarming
mode), execute the following command:
# alarmevent set hardware noticename beep1

alarmevent show (An Alarm Event)

This command is used to show an alarm event.
alarmevent show <manage|system|security|policy|commu
nication|hardware|recover|noticetest|all>
Parameter
manage|system|sec
urity|policy|commu
nication|hardware
|recover|noticetest|
all
To show a security alarm event, execute the following command:
# alarmevent show security

alarmevent show (All Alarm Events)

This command is used to show all alarm events in system.
alarmevent show
To show all alarm events in system, execute the following com-
mand:
# alarmevent show log alarmevent set system noticeid
'9044' log alarmevent set security noticeid '9044 9039'
log alarmevent set policy noticeid '9039' log alarmevent
set communication noticeid '9044' log alarmevent set
recover noticeid '9044 9039'
Description
This specifies that no alarm event rule is
contained in alarming mode and removes all
alarm events.
This indicates not generating alarms.
Description
Manage indicates management system alarm,
system indicates system alarm, security
indicates security alarm, policy indicates
policy alarm, communication indicates
communication alarm, hardware indicates
hardware alarm, recover indicates recover
alarm, noticetest indicates test alarm and all
indicates all alarm events.