Session Timeout Other; Session Timeout Syn_Proxy - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
Command Format
Parameter
Description
Example
110 Confidential and Proprietary Information of ZTE CORPORATION
To set the default max percent to which timeout never expires to
20%, execute the following command:
# session timeout never-expire default
To set the max percent to which timeout never expires to 40%,
execute the following command:
# session timeout never-expire 40

session timeout other

This command is used to set timeout of other type of sessions.
session timeout other <number|default>
Parameter
number
default
To set default timeout of other types of sessions to 20 seconds,
execute the following command:
# session timeout other default
To set timeout of other types of sessions to 200 seconds, execute
the following command:
# session timeout other 200

session timeout syn_proxy

This command is used to set SYN proxy parameter.
session timeout syn_proxy <[quota <number1> burst <num
ber2>]| default>
Parameter
<number1>
<number2>
To set SYN proxy parameter to default value, execute the following
command:
# session timeout syn_proxy default
To set SYN proxy parameter quota to 50 and burst to 70, execute
the following command:
# session timeout syn_proxy quota 50 burst 7
Description
This is one number, ranging from 10 to 7200.
This sets default timeout.
Description
This is one number, ranging from 10 to
200000 seconds.
This is one number, ranging from 10 to
200000 seconds.