ZXR10 8900 Series Command Manual (FW Volume)
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
54
Confidential and Proprietary Information of ZTE CORPORATION
server show
This command is used to show all servers.
server show
To show all servers, execute the following command:
# server show
service
Some servers use non-standard ports to provide services. For ex-
ample, port 8080 is used to provide HTTP service. Without such
data, FW will fail to decode this service correctly. As for some
special services, administrator needs to customize them on FW
system. "Service" provides the function of defining services. With
this command, user can add, modify or delete service.
service add
This command is used to add one service.
service add name <string1> protocol <number1> port <num
ber2>[port2 <number3>][comment <string2>]
Parameter
add
name
<string1>
protocol
<number1>
port
<number2>
port2
<number3>
comment
<string2>
Description
This adds one service.
This sets name for the service.
This is one string, indicating name of
customized service.
This sets L3 or L4 protocol number.
This is one number, indicating protocol
number.
This sets the start port, from which service is
enabled. In case only one port is available, it
only needs to set start port and doesn't need
to set end port.
This is one number, indicating id of start port.
This sets end port of service.
This is one number, indicating id of end port.
This sets comment.
This s one string, indicating the content of
comment.