Zte ZXR10 8900 Series Command Manual page 14

ZXR10 8900 Series Command Manual (FW Volume)
Overview
ii Confidential and Proprietary Information of ZTE CORPORATION
Manual
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Basic Configuration
Volume II)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Basic Configuration
Volume III)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Network Management
Volume)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Ethernet Switching
Volume)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Voice and Video Volume)
ZXR10 8900 Series (V2.8.02.C)
10G Routing Switch Command
Manual (Multicast Volume)
The content of this manual is based on uniform ZXROS platform.
Unless otherwise specified or when it is specified to ZXR10, the
manual applies to all devices. The items about router in the man-
ual also apply to switch with routing function.
This manual describes FW-related commands in ZXR10 8900 se-
ries (V2.8.02.C) 10G routing switch and contains the following
chapters:
Chapter
Chapter 1 DPI
Overview
Chapter 2
Signature Entry
Configuration
Chapter 3
Signature Symbol
Configuration
Chapter 4 Policy
Configuration
Chapter 5
Sub Service
Configuration
Chapter 6 Service
Configuration
Summary
This manual describes interface
configuration, DHCP and
VRRP-related commands in
ZXR10 8900 series 10G routing
switch.
This manual describes NAT, Time
Range, stack and DEBUG-related
commands in ZXR10 8900 series
10G routing switch.
This manual describes network
management-related commands
in ZXR10 8900 series 10G routing
switch.
This manual describes MAC,
VLAN, SuperVLAN, STP, link
aggregation, VBAS, MAC PING
and UDLD-related commands in
ZXR10 8900 series 10G routing
switch.
This manual describes VOIP and
IPTV-related commands in ZXR10
8900 series 10G routing switch.
This manual describes multicast
protocol-related commands in
ZXR10 8900 series 10G routing
switch.
Summary
This chapter describes using method of this
command manual, command description,
command formats, auxiliary functions and
command modes.
This chapter describes configuration of
signature entry and command used to view this
configuration.
This chapter describes configuration of signature
symbol and command used to view this
configuration.
This chapter describes configuration of policy and
command used to view this configuration.
This chapter describes configuration of sub service
and command used to view this configuration.
This chapter describes configuration of service
and command used to view this configuration.