Policy Delete - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Series Command Manual (FW Volume)
Example
Command
Function
Command Format
Parameter
Description
102 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
trans_dst
<dst_addr2>
trans_service
<ser_obj>
pat
yes|no
enable
yes|no
As for destination NAT policy whose id is 8144, to modify the ad-
dress after translation to 10.10.10.22 (address object is 10.22),
execute the following command:
# policy modify id 8144 trans_dst 10.22

policy delete

This command is used to delete one address translation policy.
policy delete id <number>
Parameter
<number>
Description
This modifies destination object after
translation.
This is one string and destination object name
after translation is input here.
Tips:
1. This parameter must be one predefi
ned address object name or attribute
name.
2. Only one object can be input here.
3. This parameter is necessary when
adding source address translation
policy.
This modifies service resource after
translation.
This is the number and service resource name
after translation is input here.
Tips:
This parameter must be one name predefined
in define module.
This modifies source port translation switch.
YES means conducting port address
translation to source port and no means not
conducting port address translation to source
port.
Tips:
Yes is the default value.
This decides whether to enable NAT policy.
Yes means enabling this address translation
policy and no means forbidding this address
translation policy temporarily.
Tips:
Yes is the default value.
Description
This is one number, which is the ID of NAT
policy to be deleted.