Define; Area; Area Add - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Format
Parameter
Description
4
C h a p t e r

define

Table of Contents:
area ................................................................................29
group_address ..................................................................32
group_service ...................................................................36
host.................................................................................39
range...............................................................................42
schedule ..........................................................................46
server ..............................................................................51
service .............................................................................54
subnet .............................................................................57
virtual_server ...................................................................60

area

In FW area management, user can add, modify and delete one
area and set default access privilege for area as well. Access con-
trol rule uses area for access control. In case no access control
rule matches, FW system will process this packet according to the
privilege of area where destination interface locates.

area add

This command is used to add one area.
area add name <string1>[access <on|off>][ attribute <strin
g2>][ comment <string3>]
Parameter
add
name
<string1>
access
on
off
Confidential and Proprietary Information of ZTE CORPORATION
Description
This adds one area.
This specifies area name.
This is a string, indicating the name of area.
This specifies privilege for accessing one area.
This permits accessing this area.
This denies accessing this area.
29